What kind of drill should I use with the JX?

What kind of drill should I use with the JX?

What kind of drill should I use with the JX? 

Any 18-24V compact non-impact drill can be used with the Trailer Valet Drill Attachment. We recommend higher voltage drills as they can handle heavier loads with ease.


    • Related Articles

    • What is the load capacity of the JX?

      JX2-C: Static Load Capacity: 3,000 lbs Lift (Manual crank): 2,000 lbs Lift(Using power drill with adapter): 750 lbs JX2-S: Static Load Capacity: 3,000 lbs Lift (Manual crank): 2,000 lbs Lift(Using power drill with adapter): 750 lbs JX5-C: Static Load ...

    • Can the JX be stored outdoors?

      Yes, the JX has three layers of weather protection and can be stored outdoors with your trailer.

    • Does the JX come with a caster wheel?

      Each JX comes standard with a foot plate. Caster wheels for the JX 2S, 2C, 5S, and 5C are sold separately. Currently, we do not sell a jack wheel compatible with the JX 7K variant.

    • Can the JX be submerged in water?

      Can the JX be submerged in water? It is recommended to avoid submerging the unit if possible as this may erode lubricants on the internal mechanisms. If the unit is exposed to salt water, it is advised to rinse the unit with fresh water.

    • What is the recommended drill torque setting?

      We recommend keeping the torque setting as low as possible while still lifting the trailer. A heavier load will require a higher torque setting. Regardless of drill setting, the drill must be slowly engaged as opposed to suddenly pulling the drill ...