Can the ball mount portion be swapped out for an alternative hitch?
Our provided weight ratings and safety information are only relevant use of the product as it is provided.
We cannot guarantee the safety of functionality of the hitch after modifications or use with other hardware.
Related Articles
Has there been a change to the Hitch Ball Base / Rotating Coupler?
Yes. Both of these were changed in diameter to allow the XL unit to be used with a jack slotting into the unit's rotating coupler in the place of the hitch ball base. The inner diameter of the rotating coupler has changed from 1.94" (49.3 mm) to ...
What is the plate on my hitch ball base for?
When installed correctly, the plate keeps the locking nut of the MV flush with the coupler, which in turn reduces the possibility of damage on the coupler should the MV pivot due to excess horizontal force. Install the plate by placing it under the ...
Does the JX Center Mount come with bolts for installation?
Three (3) 3/8" diameter, 1" long, grade 5 bolts and lock washers are provided for installation. However, depending on your coupler, alternative bolts may be needed to fit the particular threading of your coupler. Please reference you coupler's manual ...
Can the drop hitch be used as a rise instead?
The weight rating of the hitch is dependent on the drop positions. Using the product as a rise hitch instead will decrease its maximum weight rating from 14,000 lbs to 8,500 lbs.
My trailer uses a standard A-Frame hitch assembly loaded with a battery, winch and propane tank, all of which consume space on the hitch tongue. Would the MV work with this?
The MV handles this well as you can use the coupler to move the trailer. This setup may prevent use of the unit with a JX or mounting bracket if there is not 8in of adequate space for installation.